PARTS WANTED
11/16/2008
Wanted-good condition (1) trim ring for SS lll 15 inch wheel and (2) center caps (clip on style) for same wheels. Jim Degenhart
gingertipping@aol.com
727-735-2637
largo fl
AD#63490
11/16/2008
Looking for a nice (not Broken) pair of 1970 cutlass S front grilles. If you have some send amt wanted and pics. Cash!!! Bob
Budsdadandmom@aol.com
414-303-5316
Oak Creek WI
AD#63491
11/16/2008
Looking to buy a turbo 350 trans for a 1970 W31,Any condition as long as rebuildable. Pictures of the servo cover a must.Call after 6 PM EST & ask for John .
cdn442w30@execulink.com
519 652 9459
Delaware Ont
AD#63492
11/16/2008
Wanted for 1970 Rallye 350: one NOS washer bottle, I would like an original NOS one, I have already purchased a reproduction one which does not fit very well, also one side or a set of NOS front bumper lights, Thanks to all the paople who responded to my last ad, :-)
fjwhoopie@aol.com
401 499-3773
Johnston RI
AD#63493
11/16/2008
Wanted for 1970 Rallye 350: one NOS washer bottle, I would like an original NOS one, I have already purchased a reproduction one which does not fit very well, also one side or a set of NOS front bumper lights, Thanks to all the people who responded to my last ad, :-)
fjwhoopie@aol.com
401 499-3773
Johnston RI
AD#63494
11/16/2008
Wanted: NOS Red Inner Fender Wells For a 1970 4-4-2 W-30.
gnp442@sbcglobal.net
Chicago IL
AD#63496
11/15/2008
Hi,I'm looking for the trim pieces for the header, the blinker section and the center section for a 73 442 or Cutlass S, also need the head light bezels.Must be clean,straight and pit free.I'm also looking for a rust free passenger side door for a 73 to 75 Cutlass. THANKS!
pw64impala@netnet.net
(920) 822-5165
Pulaski WI
AD#63483
11/15/2008
Need a "D" head for a 69 442 W-30. Will consider complete motor if resonable.
rothomas1@aol.com
713-248-0989
Houston TX
AD#63484
11/15/2008
Wanted: matching numbers engine, with correct heads, date codes, etc. and tranny for 1969 442 W-30. No substitutes, modified or rebuilt engines please. Mine was stolen..Any help would be appreciated. Thanks, Tony
aaaolds@hotmail.com
717 626 2132
lititz pa
AD#63487
11/13/2008
WANTED: HURST PERFORMANCE RACETRONIC III computer. This was an option on the 72 Hurst Olds and Pontiac SJ Grand Prix. I am looking for a racetronic III performance computer. I would be interested in complete units, or any parts, either functional, broken, or pieces. Any info would be appreciated. Any and all help is appreciated.
garandnut@comcast.net
801-643-2289
UT
AD#63471
11/13/2008
Wanted for my 68 Olds 442 Hardtop w/factory air: complete heat riser assembly I believe it is 3 pieces. I need two pieces: the piece that is attached to the right side exhaust manifold and the pipe from this piece to the air cleaner. Also looking for the "clips" for the stainless steel trim pieces for the interior of my car that run from the top front corner of windshield across the side windows and end at the rear sail panels. These pieces finish the sides of the headliner. Have cash and/or parts to trade. Thanks!
rich_koppes@ffertl3.com
563-852-3632
Cascade IA
AD#63474
11/12/2008
wanted -- 70-72 rear quarter panel repair tin -- only need 12" around wheel well -- both sides -- thanks
pattison.patrick@yahoo.com
716 664 3244
jamestown ny
AD#63465
11/12/2008
Want to buy a 1971 Salesman Booklet that list all of the options and prices for the 1971 Oldmobiles. Please call or email Steve Hunkins
eddieh455@earthlink.net
614-262-8082 or 614-268-4491
Columbus Oh
AD#63467
11/12/2008
hello to all
looking for a center console shifter bezel for an automatic 70 442. this is the portion of the center console that shows the gear you are in. if you have this please call or email. thanks in advance.
jandt442@hotmail.com
916 600 4909
SACRAMENTO ca
AD#63469
11/11/2008
Looking for plastic tube that goes between air cleaner housing and exhaust manifold.Possibly two piece setup, for a 68 442.
ruthk@conknet.com
603-464-6657
hillsboro nh
AD#63459
11/11/2008
Wanted: 1962/63 Olds Jetfire 215 Alum V8 parts:
Turbo, carb, intake & exhaust manifolds, Air cleaner, Turbo fluid tank, 4 speed parts: bell housing, flywheel, pedals, T-10 trans.
kid442w30@yahoo.com
732-870-6964
Long Branch NJ
AD#63462
11/10/2008
Looking for a waterpump pulley for 69 442 w/ 400 w A/C. Please contact via email if you have one. Thanks
patrick.gunter@gmail.com
770-339-8647
Dacula Ga
AD#63456
11/10/2008
$$$$ SERIOUS BUYER $$$$: NOS '86-88 Cutlass 442 LH REVERSE LIGHT part #5974349, NOS '83-87 VIN 9 exhaust components (Manifolds ('86-87), Catylitic Converter, hangers, tail pipes and mufflers), NOS med gray seat belts, Bar code decals for distributor and valve covers, NOS under hood items and any other 83-87 NOS parts, let me know what you have. Have a pair of NOS 84/85 reverse lights, NOS 85-87 442 GM stripes and other NOS parts to trade if needed.
partswanted442@yahoo.com
IL
AD#63457
11/9/2008
Black Steering Wheel (3 spoke) for 68 Cutlass/442.
rmackey2@verizon.net
562-429-7826
Lakewood CA
AD#63454
11/9/2008
Im looking for a very nice original A/C dash pad in dark blue for a 69 Cutlass. Must be dark blue and in good shape, still plyable with no fading or cracks. Top dollar paid. Must furnish photo's and be willing to ship.
a442addict@hotmail.com
Toms River NJ
AD#63455
11/8/2008
Looking for NOS SS1 wheels for 1970 442. Must be perfect and complete.
mayplumbing@yahoo.com
513 708 0377
Cincinnati OH
AD#63448
11/8/2008
Need a timing cover for olds 350. Jeff
rockinjeffrey@aol.com
636 274 0497
stlouis mo
AD#63449
11/8/2008
Looking for:
- Driver side kick panel vent cover (non AC car)
- Hood latch piece on the radiator support housing
srfitts1@yahoo.com
714-357-1317
Springville UT
AD#63451
11/8/2008
WANTED, NOS reverse lamp assemblies for G body Cutlass. Both sides needed. For an 86 Supreme, but will consider any NOS pair 81-up. CASH paid.
randysimportrepair@sbcglobal.net
262-565-8762
Waukesha WI
AD#63453
11/7/2008
Real nice set of small valve 1970 "E" cylinder head cores. No rust pitting and absolutely no previous valve guide work or added valve seat rings. I have nice virgin A's, B's, C's G's, GA's, and KA's if you want to trade, or will pay cash.
rustypatterson@hughes.net
316-655-1102
Leon KS
AD#63446
11/6/2008
OEM Ram air hood for a 72 or some one to fix my original. The fiberglass is butchered up but the metal is perfect.
ianmariab@gmail.com
(773)551-5075
Chicago Il
ianmariab@gmail.com
AD#63444
11/5/2008
Wanted for Oldsmobile Cutless Supreme,88
Taillight Drivers Side
waltfehr@bluemail.ch
01141919452848
Switzerland ch
AD#63441
11/4/2008
Wanted for my 69: Delco alternator 1100853 (37 Amp) with a march or april 1969 date code. I also need 1 NOS rear quarter lamp bezel, and 1 NOS SSII wheel center. Thanks.
cxrdoc@hotmail.com
Hillsboro IL
AD#63433
11/4/2008
I'm looking for a front BENCH SEAT for a 1968 442 Holiday coupe. From what I've found, any 2-door 1968 GM A-body front bench seat will accept the '68 442 seat covers and foam. Thanks.
therockandroll66@yahoo.com
917-538-2779
Phoenix AZ
AD#63434
11/4/2008
Need 1968 Cutlass S steering wheel. prefer green
diquat66933@mypacks.net
Austin TX
AD#63438
11/3/2008
wanted to buy or i will trade for i need a set of NOS 1966 442 rear quarters i know what they cost and i am willing to step to the plate i have tons of muscle car parts up for trade but trade is reluctant as i would just as soon pay CASH as i am a muscle car wrecking yard and we all know the game some parts just cant be bought. need asap
ikanauto@aol.com
253 572 0464
seattle wa
AD#63427
11/3/2008
Looking for one good "D" head for '69 W-30 coupe restoration. Will pay fair price for quality head. Thank you.
jblount3@comcast.net
houston tx
AD#63430
11/2/2008
I am looking for a used blower intake or a used low rise 2-4 intake. For a 455 oldsmobile.
hank_1961@hotmail.com
717-633-7383
Hanover Pa
AD#63421
11/2/2008
Looking for Full Door Skins (L/H/RH)for 1970 442.
rdh_hildebrand@msn.com
903-245-5923, 903-839-0360
Tyler TX
AD#63424
11/2/2008
converting 66 olds cutlass 330 to a 4speed.need 330 flywheel.also converting same car from pwr windows to crank style.need all 4 window crank setups.
robert.kerrjr@xerox.com
412-751-9035
pittsburgh pa
AD#63425
11/2/2008
LOOKING FOR NOS SPORT STEERING WHEEL, 1970 FENDERS, AND RED INNER FENDER LINERS, AS WELL AS OTHER NOS 1970 442 PARTS FOR FUTURE RESTORATION. LEADS APPRECIATED. THANK YOU.
gah21@sbcglobal.net
Naperville IL
AD#63426
11/1/2008
looking for rust free quarter panels passanger and driver side for my 1972 cutlas s. any help appriciated
olds_455_71@hotmail.com
217 855 0150
shelbyville il
AD#63416
11/1/2008
want dual gate shifter setup for 68 442 or just the console i have the shifter used or repop will work....thanks,Artie
champ3@q.com
360 957 4184
Longview wa
AD#63420
10/31/2008
looking for hood tooth for 69 cutlass and rear arm rest thank you
oldskewl@rogers.com
toronto on
AD#63414
10/31/2008
LOOKING FOR TURN SIGNAL LEVER ( NON TILT ) FOR MY 70 CUTLASS IN GOOD SHAPE. (NO CRACKING OR PEELING ) ALSO NEED CONSOLE DOOR WITH HINGE. THANKS
rog454ss@optimum.net
River Edge N.J.
AD#63415
10/30/2008
Wanted flat 442 hood with with the luovers also good 442 rear bumper
randyhllcwb@scrtc.com
270-434-3231/270-670-4546
Fountain run ky
AD#63408
10/30/2008
I'm looking for a complete (working) power antenna assembly for my 1987 Cutlass Salon. The one on my car was replaced but with an aftermarket version that is not working and I would like to replace it with the real thing. Thanks, Andy
andrew.driscoll@gmail.com
Farmington MI
AD#63409
10/30/2008
I am looking for a 70-72 442 A/C dash in perfect condition. No chips distortion or cracks. Any color would be fine however black preferred.
Thank you,
Tom
tbrowne@vasio.com
520-730-7752
Tucson Az
AD#63410
10/30/2008
Need a set of 8 .030 or .040 pistons for a 66-67 400. Anyone have a set sitting around to sell cheap? Email me at rvkfl@netzero.net
rvkfl@netzero.net
Naples FL
AD#63412
10/28/2008
Looking for a good set of 69 cutlass or Cutlass S tail lenses.
bits_and_bytes_wheeler@hotmail.com
mb
AD#63402
10/28/2008
Looking for rocker panel trim for 72 Cutlass Supreme. Also looking for body side molding.
moses@mosesroberts.com
912-657-2178
Savannah Ga.
AD#63403
10/27/2008
Looking for a set of rally gauges for a 70 442. Also need 1 SS1 14" rim for a 70. Please good condition only. Thanks
rsfarrell1@yahoo.com
631-277-7146
East Islip NY
AD#63398
10/27/2008
Looking for a HORN RELAY for a 67 442, I think that a relay from any cutlass from 64-67 will work. HELP !!
buddyherring@comcast.net
804-672-0065
Glen Allen va
AD#63399
10/24/2008
Looking for 3:42 gear set in good condtion.
HLe6275738@aol.com
Days 516-599-7777 Eve's 516-887-0390
Lynbrook NY
AD#63387
10/23/2008
Right Angled Speedomter Adapter: this is the adapter that attaches to the sleeve which contains the trans. speedometer driven gear which in turn is driven by the trans. mainshaft drive gear. The type/ratio of angled adapter I need is usually found on 4 speed cars equipped with 3:91 or lower gear ratios (4:33, 4:66, and 5:00 ratios). I can use two types of under driven adapters, a 7.850 or 7.330 ratio. Uusually the ratio is stamped on the nut collar or houseing. There are paint codes but I am sure they would be worn off by now! I need these right angled adapters to accuratly calibrate my speedometer to read correctly since I have a 4 speed and using 4:33 gears in the rear end. Any info or help would greatly be appreciated in helping me finish my frame off restoration on a rare - - paint code (rallye red) F-85 W-31, with a 4 speed.
dave.bunch@browardschools.com
(850) 443-6877
Ft. Lauderdale FL
AD#63384
10/22/2008
Looking for a solid drivers door for my 70 442 post coupe
jefferymaddison@msn.com
262 349 0703
Waukesha WI
AD#63378
10/22/2008
Looking for a set of NOS or nice Cutlass front fender scripts for a 1964 Cutlass Holiday Coupe.
tloranz@acumeter.com
508-561-7613
Medway MA
AD#63379
10/20/2008
I need a set of side scoops(coves)trim pices for a 1965 Cutlass 442. Please help and send pictures if possiable. Would love to have bolt on ready but will look at any thing. You have always come thru on my parts needs and i hope you will this time. Thanks
mshaddix@scottsboro.org
1-256-599-2432
Scottsboro Al
AD#63368
10/20/2008
looking for 68 front dash pan, the windshield was taken out years ago and destroyed the dash pad and metal underneath it. I have a new dash pad and windshield I NEED THE METAL PIECE!!!!!!!
ledhed34@yahoo.com
608-207-0456
south beloit il
AD#63370
10/20/2008
Need bulb holders (that hold bulbs) that turn into the guage's housing and the tachometer/clock housing. Thank you.
nelsontj@winstream.net
716-661-8413
Jamestown NY
AD#63371
10/19/2008
Looking for the complete lock for a 69 442, cutlass glove box door (key if possible) Thanks,
awfisher@aol.com
856-935-8616
Salem NJ
AD#63363
10/17/2008
I'm looking for a OAI hood for a 71 72 442, either original or thornton repro is ok, but it must be in good shape. I have cash waiting if the price is right.
thanks for you time, Mike contact me on my email : coolcardude@comcast.net or on my cell 734-748-8923
coolcardude@comcast.net
734-748-8923
belleville mi
AD#63352
10/14/2008
Hey im looking for full 1/4s for a 1970 olds cutlass holiday cp thanks mike
mike.russo19@comcast.net
610 202 8086
aston pa
AD#63335
10/13/2008
HELP, looking for a windshield and the stainless steel trim that goes around it for my 1972 Cutlass "S". Any help is GREATLY appreciated.
wickedolds1972@yahoo.com
(330) 550-1021
Youngstown OH
AD#63333
10/12/2008
Looking for one SS1 bare rim and one Dog Dish cap for 1970 cutlass. If you have I need pic and how much. Thanks, BOB
Budsdadandmom@aol.com
414-303-5316
Oak Creek WI
AD#63319
10/12/2008
Need new or newer power top motor/pump
burn.ban@comcast.net
360-580-0330
Montesano WA
AD#63321
10/11/2008
looking for a set of nos or nice used set of 1/4 for a 1970 -72 olds cutlass holiday coupe thanks
mike.russo19@comcast.net
610 202 8086
aston pa
AD#63315
10/10/2008
Need both plastic inner fender wheel housings "IN ENIGINE BAY" for a 1975 Hurst Olds Cutlass please call me if you have any avaiable or can point me in the right direction
home4u4life@yahoo.com
925-382-6298
Antioch CA
AD#63302
10/10/2008
WANTED - T3 LOW BEAM HEADLIGHT FOR A 1967 442
juz440@yahoo.com
561-882-4307
Port St Lucie FL
AD#63303
10/9/2008
Looking for a 66 or 67 442 Block in good condition. 400ci w/Casting # 390925E.
rex@geonavsystems.com
805-650-6525
Ventura CA
AD#63293
10/7/2008
I need a T3 Low Beam Headlight for a 67-442.
juz440@yahoo.com
561-882-4307
Port St Lucie FL
AD#63275
10/7/2008
Wanted - Sheet metal floor pans front & rear for 49-51 Olds Holiday Also rocker panels for same.
oldsrus@comcast.net
303-466-4000
Broomfield CO
AD#63276
10/6/2008
I am looking for a set of 1971 Olds cutlass S interior panels, both door panels and rear quarter panels. I am looking for very good set, no rips or tears. I have not seen an after market set that resembles mine, this is why i have not bought them new. Looking for an original black set. thanks
tinmaninri@yahoo.com
401-524-2161
Warwick RI
AD#63264
10/6/2008
Need a new black dash for a 72 cutlass 442 convertible, no a/c. Also need sport (?) mirrors good condition on both a must. Have all new wood for dash so not a problem if wood isn't in good condition but no cracks.
treasuredkeepsakes@sbcglobal.net
in
AD#63268
10/5/2008
WANTED: Set of 14x7 Steel wheels to take dog dish caps. Code by valve stem should be either IF or XT. Also looking for a W-31 intake.
amx442@verizon.net
(508)435-6551
Ma
AD#63258
10/3/2008
Wanted : 1968 Oldsmobile OW Trans. Will pay right price for correct item.
wsi@htc.net
618-939-4570
Waterloo Il
AD#63255
10/2/2008
I am looking for 1966 442 tri power intake and carberators - complete set up. Also information on any parts. All info would greatly be appreciated.
Thanks, Dan
addiener@yahoo.com
989-823-7909 home 989-213-4315 cell
vassar mi
AD#63248
10/2/2008
Looking for 1966 442 front fenders need to be in great shape. Thanks Dan
addiener@yahoo.com
989-823-7909 home 989-213-4315 cell
vassar mi
AD#63249
10/1/2008
I need a carburator for a 65 442 400 eng, it must have the fuel filter in the carb in the front, its a rodchester , i think its the factory original
joel1949@hotmail.com
5176058943
clayton mi
AD#63234
9/29/2008
Wanted, A carbuerator for a 1973 442. Part number 7043257. It fits a 1973 442 or Cutlass with a 350 and a 4 speed. Thanks, Paul
y2kta21@chartermi.net
(989) 450-6026
Essexville Mi
AD#63223
9/28/2008
14 or 15 SS1 7 inch min wheel / set and 67 or before Grant or OEM wood steering wheel
ocofsd@yahoo.com
619 993 5291
San Diego CA
AD#63214
9/28/2008
needed for a '69 400 olds motor, alt. brackets for non-AC. numbers not important. mounts on right side of motor. i need upper bracket for sure. please send pic.
pfilutz9@netsync.net
fredonia ny
AD#63218
9/28/2008
Wanted: AC duct for center AC vent 65 cutlass/442. This is the duct that comes off the under dash AC manifold. I have chrome vent and manifold, just need duct. Thank!
dlwendell@litchfieldnetwork.com
330-667-2553
oh
AD#63220
9/26/2008
I need a clock for a 70 442 need not work just look good, also need parking light pigtail for right side
ogren442@charter.net
218-624-2177
proctor MN
AD#63204
9/26/2008
looking for a pair of nos rear quarter panels for my 69 442 hard top. also looking for a sport steering wheel. any help would be great!!! thanks karson
karsonthomas@yahoo.com
315 244 8042
potsdam ny
AD#63206
9/25/2008
I am looking for a complete cruise control setup for a 1970 cutlass. I would like a complete working system that can be from a 71 or 72 with the different steering wheel signal lever. Also anyone that has a very nice 1970 cruise turn signal lever i am interested in that also. I also need a 1970 OEM power door lock wiring harness only, uncut with all the connectors. Thanks for everones help in advance!
w31man@new.rr.com
920-312-4131
Oshkosh WI
AD#63203
9/24/2008
**WANTED** 1971 dealership option / trim binders. These are the two binder set that are a brownish / orange color found in Oldsmobile dealerships (new cars) in 1971. They contain all the information about body styles, trim packages, interior & trim colors, fabrics, vinyl & convertible top colors, paint chips & more. I have a single large binder and am looking for the matching smaller one, I would be interested in a complete set if you don't want to split up the set.
w30olds455@msn.com
740-862-0009
Baltimore oh
AD#63196
9/20/2008
Im in need of front left and right fenders for a 67 olds 442. No rust or dents. Looking for near new condition. Possibly a 442 hood as well.
chapyyone@yahoo.com
2068174731
Seattle wa
AD#63180
9/20/2008
I am looking for a Spedo housing for a 350 transmission,
papapooh@comcast.net
810-982-2752
Port Huron mi
AD#63185
9/20/2008
Hi. I am looking for a 37 amp open face alternator for my 69 (non-A/C car). I think the number is 1100767. I am also looking for 1 NOS rear quarter lamp bezel, a pair of NOS rear fender edge trims, and a pair of NOS front hood edge trim (hockey sticks). Cash, or I have other parts to trade. Thanks.
cxrdoc@hotmail.com
Hillsboro IL
AD#63186
9/19/2008
Horn Relay, I need one for my 65 cutlass/442
eric.beaupre@gmail.com
555-555-5555
peoria il
AD#63178
9/17/2008
Looking for Oldsmobile A body differential good condition 3.08-3.42 ratios. Posi not necessary but would be good. Milwaukee metro area 262-844-1822
ppulos@wi.rr.com
262 844 1822
Waukesha WI
AD#63172
9/15/2008
LOOKING FOR NOS SPORT STEERING WHEEL, NOS 1970 FENDERS, AND NOS RED INNER FENDER LINERS FOR A 1970 442. WOULD CONSIDER USED RED INNER FENDER LINERS IF IN GOOD CONDITION OR BETTER. ANY LEADS APPRECIATED. THANK YOU.
gah21@sbcglobal.net
Chicago IL
AD#63163
9/13/2008
LOOKIING FOR A 69 SPORT STEERING WHEEL.THKS., WOLF
gasie_wolf68cuda@hotmail.com
905 476 8337
keswick on
AD#63152
9/13/2008
Wanted for 71 or 72 Cutlass NOS or mint used bumperette rubber strips for the front and back bumpers, NOS white washer bottle with the GM numbers no repros please, Thanks to everyone who responded to my last ad, :-)
fjwhoopie@aol.com
401 499-3773
Johnston RI
AD#63159
9/12/2008
hi,im looking for orignal build sheets and window stickers or copys of them, i would rather buy the real thing but i will buy copys,i need them for a 1970 cutlass,442,or sx455 i need the build sheets and window stickers so i can have them made as close 2 orignal for shows, i had a window sticker made without all the info and a real car guy found all the mistakes, i dont want that 2 happen again, thanks all
raiderkingfan1@aol.com
fairfield ca
AD#63149
9/12/2008
FREE FREE FREE FREE a convertable top frame off a 1970 cutlass sx455, the frame is a lil tweeked,the guy i bought it from said he took it apart 2 oil and clean and it never worked right again,i couldnt find a rebuild kit for it so i bought a used1, this is not a rusted out top frame its in pretty good shape 4 its age, i dont want 2 throw it away because i think its fixable if you need or want it its yours im in fairfield ca, if you really need it and your out of state email me and ill email my number back, thanks all
raiderkingfan1@aol.com
fairfield cs
AD#63150
9/11/2008
LOOKING FOR OUTER WHEEL HOUSES FOR 75 CUTLASS SUPREME 2DR, ALSO A FRONT BUMPER, THANX THNX
PRO-STALL@CHARTER.NET
507-285-1122
ROCHESTER MN
AD#63147
9/10/2008
Wanted, 69 parts car. Can be any Cutlass, 442. Body must be in good shape at the lower windshield area, and trunk lip area. Engine not necessary. Will pay top $$. Pacific Northwest, or Canada only please.
regentair@hotmail.com
403 804 6987
Calgary a
AD#63144
9/9/2008
Hello. I need a left REAR window motor for my 1994 Cutlass convertible. It seems that everyone can get one for the doors, but I need one for the small window the passenger would open and close. This is on a two door convertible.
I've called 3 parts houses and the dealer and noone knows where I can find one. I'd rather find a new one than start hitting junkyards. If anyone has one or can point me in the right direction, I'd appreciate it. Thanks.
chris@eseng.us
931-645-8008
Clarksville TN
AD#63131
9/9/2008
Looking for a nice set of dog dish hub caps for my cutlass S. Can be years 68-72. Reasonable!!!! This is a driver. Cash Waiting.
Budsdadandmom@aol.com
414-303-5316
Oak Creek, WI
AD#63134
9/9/2008
I am looking for a Mint to Very Nice set of Red Wells for my 1971 W30, also needing an extra passenger side Red Well, as usual I am always interested in options, what do you have? thanks In Advance
Dan
oldsparts@msn.com
1-800-251-0278
MN
AD#63136
9/8/2008
looking for bright trim piece that fits on the front passenger fender near the windshield that matches up to the piece on the door and the hood.
kirkmills@gmail.com
956.433.1717
South Padre Island TX
AD#63117
9/7/2008
Looking for a set of needle gauges for a 70-72 cutlass/442. I have the tach, just need the needle gauges.
paulperrone@comcast.net
508-542-4775
Mendon MA
AD#63103
9/7/2008
I am looking for the mounting brackets for a 68 4 speed console. There are three. I have the front one and just need the other two. I also need the screws that attach the console to the brackets.
tomeverard@sbcglobal.net
734-434-0024
Ypsilanti MI
AD#63105
9/7/2008
I am in need of a Flat Head 238 motor for a 1941 olds 66 Club Coupe. Any help or leads is appreciated.
turlgre@bulldog.mcpherson.edu
McPherson Ks
AD#63106
9/7/2008
I need a rebuildable 1966-67 E-390925 Block 400. Block only and must be in good condition. Contact me at RVKFL@Netzero.net
rvkfl@netzero.net
239-249-9751
FL
AD#63110
9/7/2008
Looking for an original rear view mirror and chrome mounting stem for a '68 Cutlass convertible. The mirror mounts on the windshield head rail. Must be good to excellent condition. Thanks !
pcancialosi@comcast.net
708-743-5313
Orland Park IL
AD#63112
9/7/2008
Wanted: Clean frame for a 1987 Oldsmobile Cutlass.
sovietkitsch@spyderclan.net
4126138730
Pittsburgh PA
AD#63114
9/5/2008
Looking for a base plate from any Lighting Rods shifter, someone cut the cable bracket at the front from one I have. This is the plate that the cable connects to at the front, not the mounting brackets for the shifter to the floor itself used on 83/84 H/O's. I will consider any incomplete 3 or 4 speed l-rods shifter for parts, I really just need the base plate.
partswanted442@yahoo.com
IL
AD#63095
9/5/2008
wanted for 70 442, Front turnsignal lenses and gaskets, nice set of wheel opening molodings, trunk molding set of 3 pieces, 442 emblem for trunk lid, rear back-up light assemblys. Rear license plate door or bracket, front and rear window chrome, OAI air cleaner assmbly, I dont want any junk just nice stuff. Thanks
ogren442@charter.net
218-624-2177
proctor MN
AD#63096
9/5/2008
Hi, I'm in need of a radio delete panel for my 66 or 67 cutlass or 442.If you have this piece and are willing to let it go, please e-mail me at tleav61@yahoo.com
tleav61@yahoo.com
Gresham or
AD#63098
9/4/2008
$$$ WANTED $$$ Looking for a Stock Catylitic Converter and downpipe for a 1981-1988 Cutlass, prefer NOS but will take a nicely used ones. Also looking for VIN 9 Exhaust Manifolds for an 86 or 87 442, 83-85 will not work. I prefer NOS but will consider nicely used with no pits. Also need the heat shields as well in the same condition.
partswanted442@yahoo.com
IL
AD#63091
9/4/2008
Need a 1979 Hurst Olds Dual Gate Shifter Cable, must be from a 79 H/O, other 3 speed cables will not work. Please help, mine snapped and I am tired of shifting my car by the steering collar.
partswanted442@yahoo.com
IL
AD#63092
9/3/2008
LOOKING FOR A SET OF 2 RUBBER (OUTSIDE) REAR WINDOW GASKETS FOR A 1994 CUTLASS SUPREME CONVERTABLE. NOS, OR REPRO'S...POSSIBLY EVEN CUSTOM MADE....THESE ARE ALWAYS DRY ROTED, AND RIPPED/TORN...... LOOKING TO REPLACE BOTH ON MY 1994 CONVT.
oldsconvt@aol.com
401-258-0578
Rehoboth Ma
AD#63067
9/3/2008
need blower motor resistor for 69 cutlass. it has 3 blades togrther for 3 wire connector and above these is one blade for single wire connector. the gm part # is 588916 i believe
bad2bone15@hotmail.com
903-257-2169
corsicana tx
AD#63068
9/3/2008
I am looking for a set of 'H' heads for a friend. This is for a real-deal '71 W-30 that lost its heads in a machine shop several years ago. Again, looking for a good set of 'H' heads for a car that is deserving of it. Please feel free to contact me on my phone and I will gladly return your call.
rsmall@gageproducts.com
816-309-5961
Lees Summit MO
AD#63071
9/3/2008
Show worthy, NOS or professionally restored (no junk) windshield ss base trim for a 72 Cutlass Convertible
skryla@comcast.net
732.278.3255
Brick nj
AD#63072
9/3/2008
hi guys,need the following parts for my 1975 olds 442:
white front door panels (regular or power)
white back panels
all trim white trim pieces
call if you have parts car need metal above trunk and back glass frame
thanks for your help....
rluna1@cox.net
405 822 5560
oklahoma city ok
AD#63074
9/3/2008
wanted 1966 olds 3x2 manifold only AU OR AZ must be in great shape with no welds or repairs and threads must also be good. thanks john.
johnm442@frontiernet.net
651 (408-0020)
stacy mn
AD#63076
9/3/2008
Hi, I'm in need of a four speed Bell housing for my 66 442.I know they reproduce them from aluminum but would like to stay original.The code on the housing is 978551 which is stamped on the starter housing area. Thanks for your help.
tleav61@yahoo.com
503-866-2457
gresham or
AD#63077
9/1/2008
I am looking for a 4 core radiator cover for a 71 442 70-72?. Also in need of a 10 bolt posi for a 71.
daveandcolleen1987@yahoo.com
Dave 651-777-3022
daveandcolleen1987@yahoo.com
651-777-3022
Oakdale mn
AD#63053
9/1/2008
WANTED: "A" CYLINDER HEADS FOR 1965 442. WILL CONSIDER ANY CONDITION. CALL OR EMAIL WITH YOUR INFORMATION OR LEADS. ALL HELP GREATLY APPRECIATED!!!
jmsain@aol.com
256-766-0507
Florence AL
www.collectiblecarparts.com
AD#63055